What are the steps of painting? (Painting steps):

1) prepare Protect the seams of doors, window frames, furniture, paint.etc with colored paper. In addition, the prepared wooden cabinets, partitions and other furniture should be covered with newspapers to prevent paint dripping and staining.

2) color mixing For walls that require a specific color, measure the area accurately and mix the paint evenly. A primer should be applied to prevent the wall from getting damp and to ensure a uniform color finish. This also prevents water spots caused by the acidity of the wood.

3) Rolling application When painting, first paint the ceiling and then the walls. It is recommended to apply at least two coats of paint on the walls. For the first coat, water can be added to the paint to make it easier for the walls to absorb. The second layer does not need water, and there must be a certain time interval between the first layer and the second layer. Use a coarse roller to spread the paint evenly over the wall, then use a finer roller to brush over areas previously painted with the coarser roller. This helps to create an even smooth finish on the wall and achieve the desired pattern.

What are the steps of painting (1)

4) Flash application Use the brush to touch up any missing spots or areas the roller can’t reach, such as the edges and corners of walls.

5) Sand the walls After the paint dries, sand the walls to reduce brush marks and create a smoother surface. When sanding, it is important to occasionally feel the smoothness of the wall with your hands to identify areas that need sanding. Use finer sandpaper if possible. After sanding, clean the walls thoroughly.

6) check Clean up the traces of paint on the floor, etc., check whether the color of the wall meets the specified standards, and ensure that the color of the paint surface is consistent and correct. Check for quality defects such as transparency, leakage, peeling, blistering, color, and sagging.

What are the steps of painting (2)


Post time: Apr-15-2023